| View previous topic :: View next topic |
| Author |
Message |
opposedtwin
Joined: 15 Jul 2007
Posts: 61
Location: colorado
|
 Posted: Mon Jul 12, 2010 12:15 am Post subject: looking for some parts |
 |
|
hello all. i'm looking for a few parts for my 15 foot voyager but the parts might come from many crestliner models. first i'm looking for the aluminum seat back supports for the seat backs.
i'm also looking for an aluminum seat support that bolts to the floor and supports the front seat.
if you can help me out with any of these parts, please contact me at (970) 331-3297 or by emailing me at [email protected]
thanks! scott
_________________
1956 commander
1957 viking deluxe |
|
| Back to top |
|
 |
sandusky
Joined: 06 Mar 2007
Posts: 24
|
| Posted: Fri Jul 16, 2010 11:22 am Post subject: parts |
|
|
| I used some aluminum conduit that I heated and bent arount a plywood fixture to get the correct rad. then pulled a bunch of fiberglass strands through. Then waxed the outside of conduit (makes for much easier cleanup) and plugged the other with a piece of modeling clay filled within an inch or so of the top with epoxy resin. I had to turn a new cap for the top on a lathe and then epoxied it in place. It looks like the orig.my boat has seen 5 years of heavy use on the Mississippi River, waterskiing,kids all over it and I haven't had any problems I run a 50 hp. Honda 4 stroke engineon my 1956 15' Voyager, Hope this helps, I hope to soon become the proud owner of an 18' Voyager Sandusky |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
